TF-Ф45 Teflon extruder production line

Equipment configuration and technical specifications

A. Equipment Usage

This equipment is suitable for the production of fluoroplastics such as dual color FEP (perfluoroethylene propylene, also known as F46), FPA (oxyalkylene glycol resin), and ETFE (also known as F40).

B. Main specifications

1. Manufacturing line type: Used for producing fluoroplastic insulation wires such as dual color FEP, FPA, ETFE, TEFLON, etc.

2. Extrusion material: Suitable for dual color fluoroplastics such as FEP (perfluoroethylene propylene, also known as F46), FPA (ethylene oxide resin), and ETFE (also known as F40).

3. Conductor diameter: 0.3-7.0mm. (The size of the wire diameter needs to be equipped with corresponding molds)

4. Suitable wire diameter:Ф0.75mm toФ8.0mm.

5. Maximum linear speed: 1-100m/min;

6. Center height: 1000mm.

7. Power supply: 380V+10% 50HZ three-phase five wire system

8. Operation direction: Host (from to operation)

9. Machine color: Apple green; Bright blue. (Color according to customer requirements)

C. Main components:

1. 500P active tension payout rack: 1 set

2. Fully automatic copper wire preheater: 1 set

3. 45 # host (stainless steel hopper): 1 set

4. PLC computer-based control system: 1 set

5. Thermostatic water tank: 1 set

6. Fixed sink: 1 set

7. Laser caliper: 1 set

8. Closed double wheel traction machine: 1 set

9. Tension storage rack: 1 set

10. Electronic meter counter: 1 set

11. Double axis take-up machine: 1 set

12. Random spare parts and operation and maintenance manual: 1 set

13. Complete machine painting: 1 set